International Journal

1. Amit Jhalani, Sumit Sharma, Digambar Singh and Pushpendra Kumar Sharma Cow-urine emulsified diesel fuel: preparation, stability, and rheological study for diesel engine application ISSN (Online):1614-7499 Environmental Science and Pollution Research  Published: 06 December 2022
2. Ashish Dubey, Ravi Shankar Prasad, ,Jitendra Kumar Singh and Ashish Nayyar Response surface methodology (RSM) based experimental and model analysis of diethyl ether-biodiesel-diesel blends with exhaust gas recirculation (EGR) on stationary diesel engine ISSN (Print):0967-1994                ISSN (Online):1469-8730   Petroleum Science and Technology Published online: 01 Jul 2022
3. Ashish Dubey, Ravi Shankar Prasad, ,Jitendra Kumar Singh & Ashish Nayyar Combined effects of biodiesel − ULSD blends and EGR on performance and emissions of diesel engine using Response surface methodology (RSM) ISSN (Online):2772-4271   Energy Nexus, Vol. 7, Sep 2022 Available online 5 September 2022
4. Dharmendra Hariyani, Sanjeev Mishra, Milind Kumar Sharma and Poonam Hariyani Organizational barriers to the sustainable manufacturing system: A literature review ISSN (Online): 2667-0100 Environmental Challenges Volume 9, December 2022 Available online 24 August 2022
5. Dharmendra Hariyani, Sanjeev Mishra Barriers to the adoption of integrated sustainable-green-lean-six sigma-agile manufacturing system (ISGLSAMS): a literature review ISSN (Print): 1463-5771 ISSN (Online): 1758-4094 Benchmarking: An International Journal Article publication date: 2 November 2022
6. Dharmendra Hariyani, Sanjeev Mishra, Milind Kumar Sharma A descriptive statistical analysis of barriers to the adoption of integrated sustainable-green-lean-six sigma-agile manufacturing system (ISGLSAMS) in Indian manufacturing industries ISSN (Print): 1463-5771                        ISSN (Online): 1758-4094 Benchmarking: An International Journal Article publication date: 8 July 2022
7. Umesh Gurnani, Sanjay Kumar Singh, Manoj Kumar Sain and L. Meena A Postural Risk Assessment of Manual Dairy Farm Workers using NIOSH Lifting Equation ISSN (Print): 2189-0420 ISSN (Online): 2432-5953 Evergreen. 9 (3), pp.721-728, 2022 44805
8. Manoj Kumar Sain, Praveen Saraswat, Ajeet Kumar and Anand Mohan Vemula Fabrication and characterization of homogenous and functionally graded glass fiber reinforced polymer composites ISSN (Online):2214-7853 Materials Today: Proceedings Volume 66, Part 8, 2022, Pages 3602-3608 Available online 21 July 2022
9. Vishvamohan Sharma, Manoj Kumar Sain and Praveen Saraswat Experimental investigation of physical properties of homogenous and functionally graded glass fiber reinforced vinyl-ester composites ISSN (Print): 2278-2508 ISSN (Online): 2454-9673 SKIT Research Journal, Vol. 12(1), 2022 2022
10. Raj Kumar, Suganya Natarajan, Rahul Singh, Vinod Singh Rajput, Ganesh Babu Loganathan, Sanjeev Kumar, T. Sakthi, and Akter Meem Mahseena Investigation on Mechanical Durability Properties of High-Performance Concrete with Nanosilica and Copper Slag ISSN (Print): 1687-4110 ISSN (Online): 1687-4129 Journal of Nanomaterials Published 24 Aug 2022
11. Raj Kumar, S. Mohan Kumar, M. E. Shashi Kumar, V. Ravi Kumar, Rajesh Kivade Jonnalagadda Pavan, A. H. Seikh, M.H. Siddique, and Abdi Diriba Thermogravimetric Analysis and Mechanical Properties of Pebble Natural Filler-Reinforced Polymer Composites Produced through a Hand Layup Technique ISSN (Print): 1687-8434 ISSN (Online): 1687-8442 Advances in Materials Science and Engineering Published 20 Sep 2022
12. Madhur Sain, Saurabh Gupta and Varun Kumar Analysis of process parameter effect on surface roughness during Fused Deposition Modeling on PLA ISSN (Print): 2278-2508 ISSN (Online): 2454-9673 SKIT Research Journal, Vol. 12(1), 2022 2022
13. Madhur Sain and Saurabh Gupta A Review on 3D Printing using Fused Deposition Modelling ISSN (Print): 2278-2508 ISSN (Online): 2454-9673 SKIT Research Journal, Vol. 12(1), 2022 2022
14. Sanjay Kumar, Anuj Mathur, Kunj Bihari Rana, Chandan Kumar A building bio-climatic design tool incorporating passive strategies in residential dwellings design of composite climate of India International Journal of Environment and Sustainable Development, Vol. 21, Nos. 1/2, pp. 175-205, 2022 (Published Online: Nov 16, 2021) Inderscience 2021 Scopus, ESCI 1474-6778
15. Sanjay Kumar, Anuj Mathur, Kunj Bihari Rana, Chandan Kumar A building bio-climatic design tool incorporating passive strategies in residential dwellings design of composite climate of India International Journal of Environment and Sustainable Development, Vol. 21, Nos. 1/2, pp. 175-205, 2022 (Published Online: Nov 16, 2021) Inderscience 2021 Scopus, ESCI 1474-6778
16. Amit Jhalani, Dilip Sharma, Pushpendra Kumar Sharma, Digambar Singh, Sumit Jhalani and Jay Prakash Dubey A Comprehensive Review on Low-Temperature Combustion Technologies for Emission Reduction in Diesel Engines International Journal of Automotive and Mechanical Engineering, vol. 18(4), pp.9230 – 9243, Published onine 21 Dec 2021 Universiti Malaysia Pahang Publishing 2021 Scopus, ESCI 2229-8649
17. Naman choudhary, Dinesh Kumar Sharma, Ashish Nayyar A Mini Review on The Design Modifications in Evacuated Tube Solar Collectors to Improve the Performance and Productivity SKIT Research Journal, vol. 11(2), pp. 66-70, 2021 SKIT 2021  2278-2508
18. Prayagraj Singh Deora, Monika Khurana, Priya, Ram Avtar Muhal, Dhruv Upadhyay, Chandramani Goswami A review on fibrous materials for body armor application Material Today: Proceedings (Available online 17 March 2022) Elsevier 2022 Scopus 2214-7853
19. Vikash Gautam, Rounak Nuwal An Experimental Study Carried on Rotary Ultrasonic Machining on Fiber Reinforced Polymer Composites SKIT Research Journal, vol. 11(2), pp. 71-76, 2021 SKIT 2021  2278-2508
20. Ankit Agarwal, Tripti, Chandan Kumar Analyzing and Comparing the Effect of Water and Surfactant Cleaning on Performance of Solar Photovoltaic Panels SKIT Research Journal, vol. 11(1), pp. 68-72, 2021 SKIT 2021  2278-2508
21. Swati Joshi, Dheeraj Joshi Bio-fuels: Indian Scenario-A Review Ecology, Environment and Conservation (Vol. 28, May Suppl. Issue 2022; Page No.(562-565)) EM International 2022 0971-765X
22. Ankit Agarwal, Nidhi Gupta Computational Study of Energy Consumptions in Residential Building for Predicting Effectiveness of Various Energy Conservation Steps SKIT Research Journal, vol. 11(1), pp. 60-67, 2021 SKIT 2021  2278-2508
23. Chandan Kumar, K. B. Rana, M. L. Meena Design, development and performance analysis of modified solid fertilizer spreader equipped with air blower  International Journal of Environment and Sustainable Development, Vol. 20, Nos. 3/4, pp. 264-278, 2021 (Published Online: July 23, 2021) Inderscience 2021 Scopus, ESCI 1474-6778
24. Deepak Kumar, G.S. Dangayach, P.N. Rao Enhancement of quality of polypropylene by optimisation of injection moulding parameters with genetic algorithm International Journal of Environment and Sustainable Development, Vol. 21, Nos. 1/2, pp. 206-217, 2022 (Published Online: Nov 16, 2021) Inderscience 2022 Scopus, ESCI 1474-6778
25. Dinesh Kumar Sharma, Dilip Sharma and Ahmed Hamza H. Ali Exergy Destructions Analysis of Evacuated Tube Compound Parabolic Concentrator Applied Solar Energy (Published Online: March 30, 2022) Springer 2022 Scopus 0003-701X
26. Shubham Sahu, Dinesh Kumar Sharma, Manu Augustine, Sanjay Choudhary Experimental Investigation of Packed Bed Latent Thermal Energy Storage SKIT Research Journal, vol. 11(1), pp. 51-54, 2021 SKIT 2021  2278-2508
27. Varun Kumar, Dheeraj Joshi, Praveen Saraswat Experimental Investigation of Rotary Ultrasonic Face Milling on Float glass and Red granite SKIT Research Journal, vol. 11(1), pp. 73-78, 2021 SKIT 2021  2278-2508
28. Varun Kumar, Praveen Saraswat, Ajeet Kumar Experimental investigation of rotary ultrasonic face milling on red granite: A comparison with conventional grinding Material Today: Proceedings (Available online 13 Jan 2022) Elsevier 2022 Scopus 2214-7853
29. Ashish Dubey, Ravi Shankar Prasad, Jitendra Kumar Singh, Ashish Nayyar Optimization of diesel engine performance and emissions with biodiesel-diesel blends and EGR using response surface methodology (RSM) Cleaner Engineering and Technology, (Volume 8, June 2022) Elsevier 2022 Scopus 2666-7908
30. Sudesh Garg, Prem Singh, Md. Suhaib Ansari Optimization of Parameters for MRR in Drilling Operation using Jaya Algorithm SKIT Research Journal, vol. 11(2), pp. 63-65, 2021 SKIT 2021  2278-2508
31. Dharmendra Hariyani, Sanjeev Mishra Organizational enablers for sustainable manufacturing and industrial ecology Cleaner Engineering and Technology, vol.6, Feb 2022 , (Available online 29 December 2021) Elsevier 2022 Scopus 2666-7908
32. Kaushal Arrawatia, Kedar Narayan Bairwa, Raj Kumar Processing and Mechanical Behavior of Banana Fibre Reinforced Epoxy based Composite with Alumina and silicon Carbide International Journal of Scientific Research in Science and Technology (07 Jan 2022) International Journal of Scientific Research in Science and Technology 2022 2395-602X
33. Ankit Kumar Agarwal, K.B. Rana, B. Tripathi Recent advances in solar tunnel dryer for performance improvement in food drying process: a review International Journal of Environment and Sustainable Development, Vol. 20, Nos. 3/4, pp. 331-353, 2021(Published online: 23 Jul 2021) Inderscience 2021 Scopus, ESCI 1474-6778
34. Raj Kumar, Vahid M.Jamadar Recent Development in Phase Change Material (PCM) in Energy Storage Applications International Journal of Mechanical Engineering, Vol. 6 Nov-Dec 2021 Kalahari Journals 2021 Scopus 0974-5823
35. Dinesh Kumar Sharma, Dilip Sharma, Ahmed Hamza H. Ali Selection of phase change materials for thermal energy storage integrated with a solar powered vapour absorption system International Journal of Environment and Sustainable Development, Vol. 20, Nos. 3/4, pp. 279-300, 2021 (Published Online: July 23, 2021) Inderscience 2021 Scopus, ESCI 1474-6778
36. Chandan Kumar, Rajendra Singh Chundawat, Ankit Agarwal, Mukesh Kumar Selection of suitable bio-fuel for diesel engine based on fuel properties SKIT Research Journal, vol. 11(1), pp. 55-59, 2021 SKIT 2021  2278-2508
37. Suresh Choudhary, Chandan Kumar, Brij Mohan Sharma Thermal hydraulic performance analysis of rectangular duct having single step rib using CFD as a tool SKIT Research Journal, vol. 11(1), pp. 79-83, 2021 SKIT 2021  2278-2508
38. Raj Kumar, B.S.Praveen Kumar, K.V.Pradeep Kumar, K.S.Raghuram, V.Ranjith Kumar, Chirag Vibhakar, M.Sudhakar Thermomechanical pretreatment of Al-Zr-Mg-Cr alloy to improve the performance through creep-age forming Material Today: Proceedings (Available online 25 Feb 2022) Elsevier 2022 Scopus 2214-7853
39. Sharma, P., Dhanopia, A. K., & Joshi, D. (2020). An experimental study on carbon fiber thickness and layer thickness of depositing material in fused deposition modeling. Materials Today: Proceedings.
40. Singh, V., Saraswat, P., & Joshi, D. (2020). Experimental investigation of edge chipping defects in rotary ultrasonic machining of float glass. Materials Today: Proceedings.
41. Srivastav, A., & Agrawal, S. (2020). Multi-objective optimization of mixture inventory system experiencing order crossover. Annals of Operations Research, 290(1), 943-960.
42. Srivastav, A., & Agrawal, S. (2018). On a single item single stage mixture inventory models with independent stochastic lead times. Operational Research, 1-39.
43. Gautam, V., Kumar, A., Sharma, A., & Kumar, D. (2021). Tribological behaviour of hybrid reinforced vinyl ester based functionally graded materials. Materials Today: Proceedings.
44. Singh, V., Saraswat, P., & Joshi, D. (2020). Experimental investigation of edge chipping defects in rotary ultrasonic machining of float glass. Materials Today: Proceedings.
45. Kumar, C., Rana, K. B., & Tripathi, B. (2020). Performance evaluation of diesel–additives ternary fuel blends: An experimental investigation, numerical simulation using hybrid Entropy–TOPSIS method and economic analysis. Thermal Science and Engineering Progress, 20, 100675.
46. Kumar, D., Srivastav, A., & Gautam, V. (2020). Investigation on Mechanical and Thermo-Mechanical Properties of Injection Molded PP -TiO2 Composites. Material Today: Proceedings , 2214-7853.
47. Nayyar, A., Sharma, D., Soni, S. L., Gautam, V., Kumar, C., & Augustine, M. (2019). Study of performance and emissions of a stationary DI variable compression ratio CI engine fueled with n-butanol/diesel blends using Taguchi technique: analytical and experimental analysis. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, 1-27.
48. Rao, R., Sharma, A., Nayyar, A., & Kumar, C. (2020). Performance and Emission Characteristics of Diesel-2 Ethoxyethyl Acetate-Nitromethane Blends on a CI Engine-An Experimental Study (No. 2020-01-0347). SAE Technical Paper.
49. Joshi, D., Mittal, M. L., Sharma, M. K., & Kumar, M. (2019). An effective teaching-learning-based optimization algorithm for the multi-skill resource-constrained project scheduling problem. Journal of Modelling in Management.
50. Kumar, D., Dangayach, G. S., & Rao, P. N. (2019). An experimental investigation to optimise injection moulding process parameters for plastic parts by using Taguchi method and multi-objective genetic algorithm. International Journal of Process Management and Benchmarking, 9(1), 1-26.
51. Jain, R., Meena, M. L., Sain, M. K., & Dangayach, G. S. (2019). Pulling force prediction using neural networks. International Journal of Occupational Safety and Ergonomics, 25(2), 194-199.
52. Singh, P., & Chaudhary, H. (2020). Dynamic balancing of the cleaning unit used in agricultural thresher using a non-dominated sorting Jaya algorithm. Engineering Computations.
53. Singh, P., & Chaudhary, H. (2019). Dynamic balancing of cleaning unit used in agricultural thresher using Jaya algorithm. World Journal of Engineering.
54. Singh, P., & Chaudhary, H. (2020). Optimal shape synthesis of a metallic flywheel using non-dominated sorting Jaya algorithm. Soft Computing, 24(9), 6623-6634.
55. Singh, P., & Chaudhary, H. (2018). Optimal design of the flywheel using nature inspired optimization algorithms. Open Agriculture, 3(1), 490-499.
56. Singh, P., & Chaudhary, H. (2019). Optimum two-plane balancing of rigid rotor using discrete optimization algorithm. World Journal of Engineering.
57. Singh, P., & Chaudhary, H. (2018). A modified Jaya algorithm for mixed-variable optimization problems. Journal of Intelligent Systems, 29(1), 1007-1027.
58. Rao, R., Sharma, A., Nayyar, A., & Kumar, C. (2020). Performance and Emission Characteristics of Diesel-2 Ethoxyethyl Acetate-Nitromethane Blends on a CI Engine-An Experimental Study (No. 2020-01-0347). SAE Technical Paper.
59. Sharma, D. K., Sharma, D., & Ali, A. H. H. (2020). A state of the art on solar-powered vapor absorption cooling systems integrated with thermal energy storage. Environmental Science and Pollution Research, 27(1), 158-189.
60. Sain, M. K., & Meena, M. (2019). Identifying musculoskeletal issues and associated risk factors among clay brick kiln workers. Industrial health, 57(3), 381-391.
61. Jain, R., Meena, M. L., Sain, M. K., & Dangayach, G. S. (2019). Impact of posture and upper-limb muscle activity on grip strength. International Journal of Occupational Safety and Ergonomics, 25(4), 614-620.
62. Sain, M. K., & Meena, M. L. (2018). Exploring the musculoskeletal problems and associated risk-factors among brick kiln workers. International Journal of Workplace Health Management.
63. Jain, R., Meena, M. L., Sain, M. K., & Dangayach, G. S. (2019). Pulling force prediction using neural networks. International Journal of Occupational Safety and Ergonomics, 25(2), 194-199.
64. Jain, R., Sain, M. K., Meena, M. L., Dangayach, G. S., & Bhardwaj, A. K. (2018). Non-powered hand tool improvement research for prevention of work-related problems: a review. International journal of occupational safety and ergonomics, 24(3), 347-357.
65. Shukla, O. J., Joshi, A., Soni, G., & Kumar, R. (2019). Analysis of critical drivers affecting implementation of agent technology in a manufacturing system. Journal of Industrial Engineering International, 15(2), 303-313.
66. Singh, A. K., Meena, M. L., & Chaudhary, H. (2018). Measuring static muscular strength among female operatives: a cross-sectional comparison in different handicraft occupations. International Journal of Occupational Safety and Ergonomics.
67. Kumar, C., Rana, K. B., Tripathi, B., & Nayyar, A. (2018). Properties and effects of organic additives on performance and emission characteristics of diesel engine: a comprehensive review. Environmental Science and Pollution Research, 25(23), 22475-22498.
68. Sharma, S. K., Nayyar, A., & Kumar, C. Heat transfer analysis of a circular tubes using extended surfaces.
69. Sharma, P., Kumar, C., & Bansal, A. K. (2018). Productivity Improvement of Single Basin Solar Still Having Heat Pipe Arrangement: An Experimental Study for Jaipur.
70. Bharadwaj, P., & Kumar, J. Mechanical Static Bending Analysis of FG-Rectangular Plate Using MATLAB.
71. Saraswat, R., Yadav, A., & Tyagi, R. (2018). Sliding Wear Behaviour of Al-B4C Cast Composites Under Dry Contact. Materials Today: Proceedings, 5(9), 16963-16972.
72. Sharma, M., Saraswat, P., & Joshi, D. (2018). Parametric Study on Printing Time and Cost of Component in 3D Printing. SKIT Res. J., 8(2), 45-50.
73. Kumar, A., Gautam, V., & Saraswat, P. (2019). Synthesis Techniques of Functionally Graded Materials - A Review. SKIT Research Journal, vol. 9 (1) , 72-80.
74. Nayyar, A., Sharma, D., Soni, S. L., & Mathur, A. (2017). Characterization of n-butanol diesel blends on a small size variable compression ratio diesel engine: Modeling and experimental investigation. Energy conversion and management, 150, 242-258.
75. Nayyar, A., Sharma, D., Soni, S. L., & Mathur, A. (2017). Experimental investigation of performance and emissions of a VCR diesel engine fuelled with n-butanol diesel blends under varying engine parameters. Environmental Science and Pollution Research, 24(25), 20315-20329.
76. Srivastav, A., & Agrawal, S. (2018). On a single item single stage mixture inventory models with independent stochastic lead times. Operational Research, 1-39.
    Srivastav, A., & Agrawal, S. (2020). Multi-objective optimization of mixture inventory system experiencing order crossover. Annals of Operations Research, 290(1), 943-960.
77. Srivastav, A., & Agrawal, S. (2017). Multi-objective optimization of slow moving inventory system using cuckoo search. Intelligent Automation & Soft Computing, 1-7.
78. Srivastav, A., & Agrawal, S. (2017). Multi-objective optimization of a mixture inventory system using a MOPSO–TOPSIS hybrid approach. Transactions of the Institute of Measurement and Control, 39(4), 555-566.
79. Srivastav, A., & Agrawal, S. (2016). Multi-objective optimization of hybrid backorder inventory model. Expert systems with applications, 51, 76-84.
80. Nayyar, A., Sharma, D., Soni, S. L., & Mathur, A. (2017). Characterization of n-butanol diesel blends on a small size variable compression ratio diesel engine: Modeling and experimental investigation. Energy conversion and management, 150, 242-258.
81. Nayyar, A., Sharma, D., Soni, S. L., & Mathur, A. (2017). Experimental investigation of performance and emissions of a VCR diesel engine fuelled with n-butanol diesel blends under varying engine parameters. Environmental Science and Pollution Research, 24(25), 20315-20329.
82. Choudhary, K. D., Nayyar, A., & Dasgupta, M. S. (2018). Effect of compression ratio on combustion and emission characteristics of CI Engine operated with acetylene in conjunction with diesel fuel. Fuel, 214, 489-496.
83. Kumar, C., Rana, K. B., Tripathi, B., & Nayyar, A. (2018). A comparative study of oxygenated additives for diesel in compression ignition engine. International Journal of Renewable Energy Technology, 9(1-2), 16-27.
84. Pathak, S. K., Thakur, A. K., Nayyar, A., & Kumar, C. (2018). A comprehensive review of biodiesel and CNG as alternative fuels for compression ignition engine. International Journal of Renewable Energy Technology, 9(1-2), 223-243.
85. Kumar, M., Mittal, M. L., Soni, G., & Joshi, D. (2018). A hybrid TLBO-TS algorithm for integrated selection and scheduling of projects. Computers & Industrial Engineering, 119, 121-130.
86. Yadav, M., & Sain, M. K. (2018). Analysing the Process Capability of Carburettor Manufacturing.
    Saraswat, P., & Sain, M. K. (2018). A Case Study on Nicks Formation in a Bearing Manufacturing Industry.
87. Jain, R., Meena, M. L., Sain, M. K., & Dangayach, G. S. (2019). Pulling force prediction using neural networks. International Journal of Occupational Safety and Ergonomics, 25(2), 194-199.
88. Jain, R., Sain, M. K., Meena, M. L., Dangayach, G. S., & Bhardwaj, A. K. (2018). Non-powered hand tool improvement research for prevention of work-related problems: a review. International journal of occupational safety and ergonomics, 24(3), 347-357.
89. Gautam, V., Kumar, A., Prasad, L., & Patel, V. K. (2017). An experimental investigation on slurry erosion wear characteristics of brass alloy. Materials Today: Proceedings, 4(9), 9879-9882.
90. Singh, A. K., Meena, M. L., Chaudhary, H., & Dangayach, G. S. (2017). Ergonomic assessment and prevalence of musculoskeletal disorders among washer-men during carpet washing: guidelines to an effective sustainability in workstation design. International Journal of Human Factors and Ergonomics, 5(1), 22-43.
91. Pathak, S. K., Thakur, A. K., Nayyar, A., & Kumar, C. (2018). A comprehensive review of biodiesel and CNG as alternative fuels for compression ignition engine. International Journal of Renewable Energy Technology, 9(1-2), 223-243.
92. Kumar, C., Rana, K. B., Tripathi, B., & Gupta, P. (2018). Combustion characteristics of methanol blended diesel fuel in CI engine. Int J Pharm Sci Rev Res, 50, 101-104.
93. Sharma, D. K., & Agrawal, R. K. (2018). Comparative study of performance and emission characteristics of a CI engine using blends of corn oil methyl ester with diesel fuel. International Journal of Renewable Energy Technology, 9(1-2), 260-272.
94. Saraswat, P., & Sain, M. K. (2018). A Case Study on Nicks Formation in a Bearing Manufacturing Industry.
    Kumar, C., Rana, K. B., Tripathi, B., & Gupta, P. (2018). Combustion characteristics of methanol blended diesel fuel in CI engine. Int J Pharm Sci Rev Res, 50, 101-104.
95. Nayyar, A., & Dhariwal A. K. (2017). An Experimental Investigation on Performance of Agricultural Stationary Diesel Engine Fueled With Hydroxy-Diesel Mixture as a Fuel. International Journal of Recent Engineering Research and Development , 53-58.
96. Kumar, C.,  & Agarwal, A. (2018). Role of Liquid Nitrogen in Instant-Cooling System for Automobile Vehicles. International Journal of Pharmaceutical Sciences Review and Research , 89-72.
97. Kumar, C., & Rana, K. B. (2018). A Comparative Study of Various Parameters of Additives-Diesel Fuel Blend of Compression Ignition Engine. International Journal of Renewable Energy Technology , 16-24.
98. Kumar, C., & Rana, K. B.(2018). Performance and Emission Characteristic of VCR Diesel Engine Using Diesel-Nitromethane blend. International Journal of Engineering, Technology, Science and Research .
99. Sharma, Ahemad, Z. (2018). A Modeling and Analysis of Long Route Exhaust Gas Re-circulation System to Lower the NOx Emission from Internal Combustion Engine: A Review. International Journal of Renewable Energy Technology , 118-135.
100. Jangid, V., & Shukla, O. (2017). Evaluating Sustainability factors for Indian marble industries using AHP. International Journal of Scientific Research , 67-73.
101. Sain, N. K., Nayyar, A., & Kumar, C. (2015). Effect of Various Parameters on Engine Performance and Emissions for a Single Cylinder VCR Diesel Engine. International Journal of IC Engines and Gas Turbines, 1(2), 26-31.
102. Yadav, M., & Sain, M. K. (2016). Analyzing the Process Capability for an Auto Manual Transmission Base Plate Manufacturing. Int. J. Manag. Value Supply Chain, 7, 79-86.
103. Sain, M. K., & Meena, M. L. (2017). Analysing the occupational health of workers in the brick kilns of Rajasthan. Interdisciplinary Environmental Review, 18(2), 101-107.
104. Gautam, V., Patnaik, A., & Bhat, I. K. (2016). Microstructure and wear behavior of single layer (CrN) and multilayered (SiN/CrN) coatings on particulate filled aluminum alloy composites. Silicon, 8(3), 417-435.
105. Sain, N. K., Nayyar, A., & Kumar, C. (2015). Effect of Various Parameters on Engine Performance and Emissions for a Single Cylinder VCR Diesel Engine. International Journal of IC Engines and Gas Turbines, 1(2), 26-31.
     Kumar, S., Shrivastav, B., Kumar, C., & Anand, S. Multi Response Optimization of Turning Parameters using Grey Relational Analysis in the Taguchi Methodology.
106. Jhalani, S., Patankar, A., Makawana, A., & Bose, M. (2017). Dune formation in dilute phase pneumatic transport system: PIV & PTV based analysis. In EPJ Web of Conferences (Vol. 140, p. 09007). EDP Sciences.
107. Dhanopia, A., & Bhargava, M. 3 Dimensional Virtual Modelling of Human Femur Bone with Prosthetic Plate and Screws. International Journal of Advanced Engineering, Management and Science, 2(9), 239628.
108. Dhanopia, A., & Bhargava, M. (2017). Finite element analysis of human fractured femur bone implantation with PMMA thermoplastic prosthetic plate. Procedia engineering, 173, 1658-1665.
109. Ajay Dhanopia, K. S. (2016). Design and Development of Hybrid Electrical Folding Bicycle. SKIT RESEARCH JOURNAL .
110. Ankit Agarwal, S. S. (2016). Optimization of Compression Ratio & Fuel Blend for SI Engine Using N-Butanol and Petrol Blends. SKIT Research Journal .
111. Ajay Kr. Dhanopia, A. M. (2017). Design and Development of Hybrid Electrical Folding Bicycle. SKIT RESEARCH JOURNAL .
112. Ajay Kr. Dhanopia, M. B. (2016). Selection of Suitable Biomaterial for Prosthetic-Plate using Multi Criteria Decision Analysis. International Journal of Scientific Research Engineering & Technology (IJSRET) .
113. Ashish Kumar Singh, P. S. (2016). Sustainable Design and Life-cycle assessment of Connecting Rod for Material Optimization. Journal of Energy and Environmental Sustainability , 36-42.
114. Chandan Kumar, A. N. (2017). Effects of Exhaust Gas Recirculation (EGR) on Performance and Emissions of a Compression Ignition (CI) Engine Fuelled with Diesel. SKIT Research Journal , 7 (2), 64-69.
115. Chandan Kumar, K. B. (2017). Performance and Emission Characteristic of VCR Diesel Engine Using Diesel -Nitromethane blend. International Journal of Engineering, Technology, Science and Research , 375-380.
116. Keshav Jakhotia, S. G. (2016). Enterprise Resource Planning (ERP): Implementation Guidelines and Issues. SKIT Research Journal .
117. Praveen Saraswat, P. R. (2017). Application of Firebird -V as Restaurant Assistant: Order Taking Robot. SKIT RESEARCH JOURNAL .
118. Namita Soni, M. B. (2017). Experimental Investigation and Numerical Simulation of Marble Dust Filled Aramid Fibre Reinforced Epoxy Composite for Wind Turbine Blade Application. International Journal of Scientific Research Engineering & Technology .
119. Pathak, C. K. (2017). Effects of Exhaust Gas Recirculation (EGR) on Performance and Emissions of a Compression Ignition (CI) Engine Fuelled with Diesel. SKIT Research Journal , 64-69.

120. Kumar, S., Bansal, A. K., Anand, S., Kumar, C., & Srivastava, B. Optimization of EDM Parameters for Minimum Surface Roughness During Electric Discharge Machining using Two Level Full Factorial Design.
121. Goyal, N., Nayyar, A., & Kumar, C. (2016). Experimental Investigation of the Emission of Diesel Engine Fuelled by N-Butanol-Diesel Blend.
122. Sain, M. K., & Meena, M. L. (2016). Occupational health and ergonomic intervention in Indian small scale industries: a review. Int J Recent Adv Mechanical Engin, 5(1), 13-24.
123. Yadav, M., & Sain, M. K. (2016). Analyzing the Process Capability for an Auto Manual Transmission Base Plate Manufacturing. Int. J. Manag. Value Supply Chain, 7, 79-86.
124. Saraswat, P., Kumar, D., & Sain, M. K. (2015). Reduction of work in process inventory and production lead time in a bearing industry using value stream mapping tool. International Journal of Managing Value and Supply Chains (IJMVSC), 6(2), 142-148.
125. Sain, M. K., Meena, M. L., Dangayach, G. S., & Bhardwaj, A. K. (2018). A Brief Procedure for Ergonomic Design of Hand Tool for Small-Scale Industries. In Ergonomics in Caring for People (pp. 209-214). Springer, Singapore.
126. Singhal, A., Sain, M. K., & Agarwal, A. (2016). A Review on Factors Affecting the Performance of A Single Basin Solar Still.
     Augustine, M., Sharma, D., Bhaskar, S., & Beniwal, B. (2016). Cognitive maps: A Review of Applications and Advancements.
127. Padwa, R. S., Gupta, S., Singh, V., & Kumar, C. (2016). Experimental Investigation on the Performance of VCR Diesel Engine Fuelled by E–NM2–Diesel blend. International Journal of Innovative Research in Science, Engineering and Technology, 5, 6794.
128. Kumar, C., Agrawal, A., & Godara, O. P. Water Conservation System for Domestic Area.
129. Goyal, N., Nayyar, A., & Kumar, C. (2016). Experimental Investigation of the Emission of Diesel Engine Fuelled by N-Butanol-Diesel Blend.
130. Agarwal, A., Soni, S. L., Sharma, D. K., & Bhaskar, S. K. (2015). Effect of variation of compression ratio and injection pressure on performance and emission characteristics of CI engine using various alternative fuels: a review. International Journal of Research in Engineering and Technology, 4.
131. Surana, S., Kumar, C., & Prakash, V. (2015). A Study on Upcoming Technologies in Automobile.
132. Dhanopia, A., Rathi, A., Yadav, A. K., Bhardwaj, A., Singhal, A., Sain, A. P., & Mittal, A. Design, Development and Testing of Convertible Bicycle.
133. Kumar, S., Srivastava, B., & Kumar, C. (2015). Study of MRR on AISI D3 Die Steel with Different EDM Parameters using Two Level Full Factorial Design. IJIRST–International Journal for Innovative Research in Science & Technology, 1(12), 380-387.
134. Nayyar, A., & Kumar, C. (2016). Experimental Investigation on the Performance of VCR Diesel Engine Fuelled by E-NM2-Diesel blend. International Journal of Innovative Research in Science, Engineering and Technology .
135. Jakhotia, K., Garg, S., &  Hariyani, D. (2015). Information and communication Technologies (ICT): A competitive strategy for Factories of Future. SKIT RESEARCH JOURNAL. 5(2), 56-58.

International Conference

1. Chandan Kumar, K. B. Rana, Mohd. Suhaib Ansari & Raju Malani International Conference Effect of D–DEE–E Blend and Various Operating Parameters on CI Engine Performance: An Experimental Study ISBN (Print): 978-981-19-3409-4  ISBN (Online): 978-981-19-3410-0 iconects 2021 Emerging Trends in Energy Conversion and Thermo-Fluid Systems. Lecture Notes in Mechanical Engineering. Springer, Singapore First Online: 21 August 2022
2. Chandan Kumar, Suhaib Ansari  Effect of D - DEE - E blend and various operating parameters on CI engine performance: An experimental study International Conference on Energy Conversion and Thermo-fluid Systems i-CONECTS-2021-10-194 2021 ISBN (Print)                                                            ISBN (Online)     SKIT Jaipur
3. Nitin Goyal, Namita Soni An Experimental Investigation of Hydroxy-Diesel Mixture Fuel’s Performance and Emission on Agricultural Stationary Diesel Engine Proceedings of International Conference On “Recent Advancements in Science, Engineering & Technology, and Management” ICRASETM-2021 2021 ISBN (Print) 978-81-954233-4-7 ISBN (Online) SKIT Jaipur
4. Vinay Singh Marwal, Vishnu Jangid, Deepak Kumar Cost Reduction in Copper Refining Unit by Improving Material Handling Through Layout Modification Proceedings of International Conference On “Recent Advancements in Science, Engineering & Technology, and Management” ICRASETM-2021 2021 ISBN (Print) 978-81-954233-4-7 ISBN (Online) SKIT Jaipur
5. Madhukar Kumar, Sumita Hemrom, Sanjay Choudhary Design and Fabrication of Man Powered Crop Cutter Proceedings of International Conference On “Recent Advancements in Science, Engineering & Technology, and Management” ICRASETM-2021 2021 ISBN (Print) 978-81-954233-4-7 ISBN (Online) SKIT Jaipur
6. Nikhil Sharma Design and Fabrication of Reusable Sand Power Generator Proceedings of International Conference On “Recent Advancements in Science, Engineering & Technology, and Management” ICRASETM-2021 2021 ISBN (Print) 978-81-954233-4-7 ISBN (Online) SKIT Jaipur
7. Pramod Jain Design of Hybrid Power Operated Vegetable Cutting Machine for Domestic and Industrial Ease of Work Proceedings of International Conference On “Recent Advancements in Science, Engineering & Technology, and Management” ICRASETM-2021 2021 ISBN (Print)                                       978-81-954233-4-7 ISBN (Online) SKIT Jaipur
8. Chandan Kumar, Naveen Kumar Sain Foldable Child Carrier cum Luggage Trolley Proceedings of International Conference On “Recent Advancements in Science, Engineering & Technology, and Management” ICRASETM-2021 2021 ISBN (Print) 978-81-954233-4-7 ISBN (Online) SKIT Jaipur
9. Trivendra Kumar Sharma, Prem Singh, Monu Gupta Free Vibration analysis of functionally graded piezoelectric thin to thick plate by using Finite Element Method Proceedings of International Conference On “Recent Advancements in Science, Engineering & Technology, and Management” ICRASETM-2021 2021 ISBN (Print) 978-81-954233-4-7 ISBN (Online) SKIT Jaipur
10. Achin Srivastav, Nidhi Srivastav Optimization of Mixture Inventory System subject to OSL and Fill Rate constraint Proceedings of International Conference On “Recent Advancements in Science, Engineering & Technology, and Management” ICRASETM-2021 2021 ISBN (Print) 978-81-954233-4-7 ISBN (Online) SKIT Jaipur
11. Chandan Kumar, Manoj Kumar Sain, Praveen Saraswat Performance Analysis of Single Slope Solar Still With Wick Material Mixed Al Fins Proceedings of International Conference On “Recent Advancements in Science, Engineering & Technology, and Management” ICRASETM-2021 2021 ISBN (Print) 978-81-954233-4-7 ISBN (Online) SKIT Jaipur
12. Sudesh Garg, Prem Singh Prediction Model of Cutting Parameters in Drilling Operation using Response Surface Methodology (RSM) for Surface Roughness Proceedings of International Conference On “Recent Advancements in Science, Engineering & Technology, and Management” ICRASETM-2021 2021 ISBN (Print) 978-81-954233-4-7 ISBN (Online) SKIT Jaipur
13. Manoj Kumar Sain, Praveen Saraswat, Dheeraj Joshi A Review on Performance Enhancement Methods for Solar Stills Proceedings of RTU (ATU) TEQIP III Sponsored “3rd International Conference on
14. New and Renewable Energy Resources for Sustainable Future” ICONRER 2021 2021 ISBN (Print) 978-81-954233-3-0 ISBN (Online) SKIT Jaipur
15. Deepak Kumar, Achin Srivastav, Vikash Gautam Comparison of Mechanical Behaviour of Pp Composites Fabricated by Plastic Injection Moulding Proceedings of RTU (ATU) TEQIP III Sponsored “3rd International Conference on New and Renewable Energy Resources for Sustainable Future” ICONRER 2021 2021 ISBN (Print) 978-81-954233-3-0 ISBN (Online) SKIT Jaipur
16. Arun Beniwal, Yogesh Kumar Sharma, Vishnu Jangid, Sanjay Bairwa Design And Simulation of 3D Printed Hovercraft as a Resupply Vehicle with Cfd Proceedings of RTU (ATU) TEQIP III Sponsored “3rd International Conference on New and Renewable Energy Resources for Sustainable Future” ICONRER 2021 2021 ISBN (Print) 978-81-954233-3-0 ISBN (Online)     SKIT Jaipur
17. Yogesh Kumar Sharma, Vishnu Jangid, Sanjay Bairwa, Arun Beniwal Fabrication And Testing of Banana Fibre Reinforcement Polymer Composites Proceedings of RTU (ATU) TEQIP III Sponsored “3rd International Conference on New and Renewable Energy Resources for Sustainable Future” ICONRER 2021 2021 ISBN (Print) 978-81-954233-3-0 ISBN (Online) SKIT Jaipur
18. Achin Srivastav, Prem Singh, Deepak Kumar Inventory Management of Residential Solar Panels Proceedings of RTU (ATU) TEQIP III Sponsored “3rd International Conference on New and Renewable Energy Resources for Sustainable Future” ICONRER 2021 2021 ISBN (Print) 978-81-954233-3-0 ISBN (Online) SKIT Jaipur
19. Naveen Kumar Sain, Ashish Nayyar, Chandan Kumar Investigation of The Effects of Ternary Dieseladditives Blends on Vcr Diesel Engine Proceedings of RTU (ATU) TEQIP III Sponsored “3rd International Conference on New and Renewable Energy Resources for Sustainable Future” ICONRER 2021 2021 ISBN (Print) 978-81-954233-3-0 ISBN (Online) SKIT Jaipur
20. Dinesh Kumar Sharma Scenario of Cooling Systems Powered by Solar Energy in India Proceedings of RTU (ATU) TEQIP III Sponsored “3rd International Conference on New and Renewable Energy Resources for Sustainable Future” ICONRER 2021 2021 ISBN (Print) 978-81-954233-3-0 ISBN (Online) SKIT Jaipur
21. Prem Singh, Trivendra Kumar Sharma , Achin Srivastav Selection of Optimum Parameters for Electro-Chemical Machining (ECM) using Genetic Algorithm Proceedings of RTU (ATU) TEQIP III Sponsored “3rd International Conference on New and Renewable Energy Resources for Sustainable Future” ICONRER 2021 2021 ISBN (Print) 978-81-954233-3-0 ISBN (Online) SKIT Jaipur
22. Praveen Saraswat Design analysis of payload carrying quadcopter using finite element analysis Smart Technologies, Communication and Robotics (STCR), 9-10 Oct. 2021 STCR 2021 2021 ISBN (Print) 978-1-6654-1807-2 ISBN (Online) 978-1-6654-1806-5 SKIT Jaipur
23. Sain, N. K., Nayyar, A., Kumar, C., Rana, K. B., & Tripathi, B. (2020). Effect of Nitromethane–n-Butanol–Diesel Blends on Diesel Engine Emissions. In Advances in Energy Research, Vol. 2 (pp. 457-466). Springer, Singapore.
24. Agarwal, A. K. (2019). Influence of Various Parameters on Performance of Solar Tunnel Dryer: A Review. International conference on new and renewable energy resources for sustainable future. SKIT, Jaipur.
25. Agarwal, A., & Jhalani, S. (2019). Recent advances in solar dryer for drying agriculture produce: A Review. International conference on new and renewable energy resources for sustainable future. SKIT, Jaipur.
26. Agarwal, A., & Saraswat, P. (2019). A comparative analysis of various pv panels through life cycle assessment. International conference on new and renewable energy resources for sustainable future. SKIT, Jaipur.
27. Agarwal, A., & Sharma, D. (2019). Use of system advisory model software to propose a prediction model to design 50 mw solar thermal power plant. "international conference on new and renewable energy resources for sustainable future. SKIT, Jaipur.
28. Bairwa, S., & Saraswat, P. (2019). Mechanical and tribological characterization of nickel/copper hybrid reinforced 5083 aluminium alloy composites. International conference on new and renewable energy resources for sustainable future. SKIT, Jaipur.
29. Bansal, A. K. (2019). A review on waste heat recovery systems with thermal energy storage in internal combustion (IC) engine. International conference on energy & environment: challenges and opportunities for industries, MNIT Jaipur. Jaipur.
30. Beniwal, A., Sharma, D. K., Jain, P., & Gupta, S. (2019). Thermal regulation and performance enhancement of solar pv panel using PCM OM29. International conference on new and renewable energy resources for sustainable future. SKIT, Jaipur.
31. Bhaskar, S. K., Sharma, D. K., Sain, N. K., & Sharma, B. M. (2019). Design of shell and tube heat exchanger for waste heat recovery from exhaust gases coming out of a nonroad compression ignition engine. International conference on new and renewable energy resources for sustainable future. SKIT, Jaipur.
32. Dhanopia, A. (2019). An introduction to the design of foldable e-bike for clean & safe travelling. National conference on sustainable development (SDSC-2019).
33. Dhanopia, A. (2019). Design and development of spherical cross flow hydrokinetic turbine for hydal energy. International conference on new and renewable energy resources for sustainable future. SKIT, Jaipur.
34. Gautam, V. (2019). Mechanical and wear characterization of epoxy resin based fgm for sustainable utilization of stone industry waste. International conference on new and renewable energy resources for sustainable future. SKIT, Jaipur.
35. Gautam, V. (2019). Utilization of stone industry waste as filler for sustainable development of aluminium alloy composites: an thermo-mechanical and mechanical characterizations. International conference on new and renewable energy resources for sustainable future. SKIT, Jaipur.
36. Goyal, N. (2019). Experimental investigation of the performance and emission of diesel engine fuelled with n-butanol diesel blend. International conference on new and renewable energy resources for sustainable future. SKIT, Jaipur.
37. Jhalani, S. (2019). Low temperature combustion technologies for emission reduction in diesel engines with special focus on water emulsification technique. International conference on new and renewable energy resources for sustainable future. SKIT, Jaipur.
38. Joshi, D. (2020). Modeling a bi-objective multi-skill resource-constrained project scheduling problem to minimize project makespan and skill divergence span. Proceedings of the international conference on industrial engineering and operations management dubai, UAE. Dubai.
39. Khurana, M. (2019). Air erosion behaviour of sic filled carbon fiber-epoxy composites. 6th international conference on production and industrial engineering (CPIE-2019). Jalandhar.
40. Khurana, M. (2019). Investigation of mechanical properties in silicon carbide filled carbon fiber composites. 6th international conference on production and industrial engineering (CPIE-2019). Jalandhar.
41. Khurana, M., & Gupta, M. (2019). Investigation of air erosion behavior of si & co particulate filled aluminium alloy based mmcs. International conference on new and renewable energy resources for sustainable future. SKIT, Jaipur.
42. Kumar, C. (2019). A building bio-climatic design tool incorporating passive strategies in residential dwellings design of composite climate of india. International conference on new and renewable energy resources for sustainable future. SKIT, Jaipur.
43. Kumar, C. (2019). Fertilizer/seeds spreading machine: development and testing. International conference on new and renewable energy resources for sustainable future. SKIT, Jaipur.
44. Kumar, C. (2019). The influence of D-DEE-E blend and various operating parameters on ci engine performance. International conference on new and renewable energy resources for sustainable future. SKIT, Jaipur.
45. Kumar, C. (2019). Use of 2–methoxyethyl ether and nitromethane as oxygenated additives for performance improvement and emission reduction of ci engine: an experimental study. "2nd international conference on recent trends in environment and sustainable development.
46. Kumar, C. M., Suhaib, M., & Kumar, M. (2019). Use of renewable hydrogen energy in small scale system for a remote village house appliance. International conference on new and renewable energy resources for sustainable future. SKIT, Jaipur.
47. Kumar, C., & Nayyar, A. (2019). The influence of diesel-additives ternary fuel blends on non-road vcr diesel engine using hybrid entropy-vikor technique: experimental analysis and numerical simulation. International conference on new and renewable energy resources for sustainable future. SKIT, Jaipur.
48. Kumar, M., & Kumar, C. M. (2019). Man cum engine powered crop cutter. International conference on new and renewable energy resources for sustainable future.SKIT, Jaipur.
49. Marwal, V. S. (2019). Work-related health problems among welding workers – a review. International conference on new and renewable energy resources for sustainable future. SKIT, Jaipur.
50. Nayyar, A. (2019). Experimental investigation of variation in number and height of fins on outlet temperature of heat exchanger using cfd. International conference on new and renewable energy resources for sustainable future . SKIT, Jaipur.
51. Nayyar, A. (2019). Performance study of grid associated rooftop solar photovoltaic module system. International conference on new and renewable energy resources for sustainable future. SKIT, Jaipur.
52. Nayyar, A., & Agarwal, A. (2019). Municipal solid waste management in india: status, problems, challenges & solutions. International conference on new and renewable energy resources for sustainable future. SKIT, Jaipur.
53. Nayyar, A., & Sharma, D. K. (2019). Solar pv plant re-powering: mission transform-nation. International conference on new and renewable energy resources for sustainable future. SKIT, Jaipur.
54. Sain, M. K. (2019). Optimizing the cycle time in tractor parts manufacturing using value stream mapping. International conference on new and renewable energy resources for sustainable future. SKIT, Jaipur.
55. Sain, N. K., Augustine, M., Rana, K. B., & Kumar, C. (2019). Review of effect of ternary blends on the performance and emissions of stationary vcr diesel engine. International conference on new and renewable energy resources for sustainable future. SKIT, Jaipur.
56. Sain, N. K., Nayyar, A., & Kumar, C. (2019). Effect of diesel-n-butanol-nitromethane blend on performance of a direct injection vcr diesel engine. International conference on new and renewable energy resources for sustainable future. SKIT, Jaipur.
57. Saraswat, P. (2019). An experimental analysis of impact and flexural mechanical properties on polylactic acid and polylactic acid with carbon fiber in a fdm fabricated part by 3D printer. International conference on new and renewable energy resources for sustainable future. SKIT, Jaipur.
58. Saraswat, P. (2019). Experimental analysis of the effect of rusm process parameters on the material removal rate and overcut by dmaic methodology. International conference on new and renewable energy resources for sustainable future. Jaipur.
59. Saraswat, P. (2019). Implementation of 5s method in ceramic industry: a case study. International conference on new and renewable energy resources for sustainable future. SKIT, Jaipur.
60. Saraswat, P., & Gautam, V. (2019). Physical and mechanical properties of graphite-glass fibre epoxy based functionally graded materials for turbine blades. International conference on new and renewable energy resources for sustainable future. SKIT, Jaipur.