Course Outcomes:
C5ME4-23.1 |
Measure the linear dimensions with the help of vernier caliper, vernier height gauge, micrometer, dial gauge and telescopic gauges. |
C5ME4-23.2 |
Measure the angle by universal bevel protractor and sine bar. |
C5ME4-23.3 |
Use slip gauges to build required dimensions. |
C5ME4-23.4 |
Use instruments namely optical flat, optical profile projector, tool maker microscope and surface roughness tester to find out parameters of gear, screw threads and cutting tool by stating possible errors and limitations. |
C5ME4-23.5 |
Use appropriate instruments and techniques to measure the cutting forces during turning, milling and drilling operations and measure chip-tool interface temperature during turning using thermocouple and analyse the results by stating possible errors and limitations. |
Mapping Matrix of CO's and PO's:
COs |
PO 1 |
PO 2 |
PO 3 |
PO 4 |
PO 5 |
PO 6 |
PO 7 |
PO 8 |
PO 9 |
PO 10 |
PO 11 |
PO 12 |
PSO 1 |
PSO 2 |
C5ME4-23.1 |
2 |
1 |
- |
2 |
- |
- |
- |
- |
3 |
3 |
- |
- |
- |
3 |
C5ME4-23.2 |
2 |
1 |
- |
2 |
- |
- |
- |
- |
3 |
3 |
- |
- |
- |
3 |
C5ME4-23.3 |
2 |
1 |
- |
2 |
- |
- |
- |
- |
3 |
3 |
- |
- |
- |
3 |
C5ME4-23.4 |
2 |
1 |
- |
2 |
- |
- |
- |
- |
3 |
3 |
- |
- |
- |
3 |
C5ME4-23.5 |
2 |
1 |
- |
2 |
- |
- |
- |
- |
3 |
3 |
- |
- |
- |
3 |